Intermec EasyCoder 4100, User Manual

Page: 114 / 282

5-8
4100 Bar Code Label Printer User's Manual
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Error Codes
Most of the problems you encounter will cause the 4100 printer to send an error
code to the host. When this happens, find the message in the table below and
follow the instructions to fix the problem.
Error
Code
Problem Solution
00 No error
01 Invalid bar code check character Verify the bar code check character modifier used in the
bar code program command.
02 Invalid number of bar code characters
(Code UPC/EAN) Verify the number of bar code characters used in the
bar code program command.
04 Bar code check character within numeric
field marks Check the bar code program command for accuracy.
05 Supplemental delimiter within numeric
field marks (Code UPC/EAN) Check the bar code program command for accuracy.
06 Invalid supplemental character count
(Code UPC/EAN) Check the bar code program command for accuracy.
07 More than one supplemental delimiter
(Code UPC/EAN) Check the bar code program command for accuracy.
08 Invalid start/stop characters (Codabar) Verify start and stop characters in the label format.
11 Invalid bar code data Verify data in the label format.
12 Data count exceeded Data count should not exceed what is specified for
field.
13 Entering data in non-data entry field Check the field for accuracy.
21 Quantity or batch count out of range Quantity of labels or number of batches should be
between 1 and 9999.
22 Field increment/decrement out of range Quantity should be between 1 and 9999.
23 Intercharacter/message delay out of range Delay should be between 0 and 9999.
24 Missing preamble/postamble data Delete the setup for preamble or postamble data, or
include the data.
25 Invalid format transmission syntax Check the format transmission syntax. The correct
syntax is <ESC>x [n] with n ranging from 0 to 19.