Intermec EasyCoder 4100, User Manual

Page: 175 / 282

7
7-5
Printer Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Summary of the Printer Command Set (Continued)
Command Factory 8636/46 Page Command
Function Code Default Emulation No. Mode
Character Rotation or Bar Code Ratio, Define
r
0 yes 7-51 Program
Character Width Magnification, Define
w
1 yes 7-65 Program
Clear All Data
<CAN>
yes 7-20 Print
Clear Data from Current Field
<DEL>
yes 7-21 Print
Code 39 Prefix Character, Define
p
yes 7-52 Program
Command Tables, Load
C
yes 7-52 Program
Command Terminator
;
yes 7-67 Test/Serv.
Command Terminator 1
<NUL>
yes 7-21 Print
Command Terminator 2
<LF>
yes 7-21 Print
Configuration Parameters, Transmit
<ESC>p
yes 7-21 Print
Control Panel Access Permission, Set*
<SI>A
0 N/A 7-34 Configuration
Current Edit Session, Save
N
yes 7-53 Program
Cut
<SO>
N/A 7-21 Print
Cutter, Enable or Disable
<SI>c
0 N/A 7-34 Configuration
Dark Adjust
K
yes 7-66 Test/Serv.
Dark Adjust, Set
<SI>d
0 yes 7-34 Configuration
Data Shift - International Characters
<SUB>
yes 7-22 Print
Data Source for Format in a Page, Define
e
0 no 7-53 Program
End-of-Print Skip Distance, Set
<SI>D
200 yes 7-34 Configuration
Error Code, Request
<BEL>
yes 7-15 Immediate
Factory Defaults, Reset
D
yes 7-66 Test/Serv.
Field, Delete
D
0 yes 7-54 Program
Field, Select
<ESC>F
0 yes 7-22 Print
Field Data, Define Source
d
0 yes 7-54 Program
Field Decrement, Set
<ESC>D
1 yes 7-22 Print
* The 4100 printer ignores these commands.