Intermec EasyCoder 4100, User Manual

Page: 157 / 282

6-25
6
Fr Goth
Designing Labels and Using Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
The upper-left corner of an unrotated field is called the field origin. To define the
coordinates of the field origin, you use the origin command ox,y where o is the
command that specifies origin, x is the distance from the left side of the label,
and y is the distance from the label top.
The x and y coordinates of the field origin are measured in dots, and there are
203.2 dots per inch, or 8 dots per millimeter.
To position a field to print 1 inch from the top of your label and approximately
1/2 inch from the left side, the origin command would be o101,203.
Note: If you are running the printer in 86XX Emulation mode, the dot sizes will be
doubled (101.6 dots per inch or 4 dots per millimeter).
Field Positions
H R F i e l d S e c o n d H R F i e l d
*BCFIELD*
* B C F I E L D *
D
A
B
C
A = o101, 203
B = 0101, 320 C = o101, 420
D = o300, 203
4 1 0 0 - 2 4