Intermec EasyCoder 4100, User Manual

Page: 211 / 282

7
7-41
Printer Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Print Speed Minimum Dot Minimum Print Speed Minimum Dot Minimum
(ips) Increments Inches (ips) Increments Inches
2.5 135 0.675 5.5 220 1.10
3.0 148 0.74 6.0 232 1.16
3.5 163 0.815 6.5 246 1.23
4.0 179 0.895 7.0 263 1.315
4.5 193 0.965 7.5 283 1.415
5.0 210 1.05 8.5 306 1.53
Notes
:
The ribbon save option must be installed or the printer
will ignore this command. Setting a ribbon save zone
enables ribbon save. Entering no ribbon save zones clears
all ribbon save zones within this label. If only one
parameter is entered, the command is ignored. The
maximum number of zones possible on one label is 10.
Additional zones are ignored. This command is buffered
up and becomes effective upon execution.
Self-Strip, Enable or Disable
Syntax
: <
SI>t{n}
Notes
: This command is ignored by the 4100 printer. However,
you can enable self-strip by using the DIP switches.
Top of Form, Set
Purpose
:
Sets the top of form (left margin) to n which is the
distance, in dot increments, from the label origin to its
leading edge.
Default
:
n=20
Syntax
:
<SI>F{n}
n must be a number from -10 to 4000 dot increments.
Notes
:
This command is effective upon execution.