Intermec EasyCoder 4100, User Manual

Page: 183 / 282

7
7-13
Printer Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Print Mode
Print Commands
<ACK>
First Data Entry Field, Select 7-23
<CAN>
Clear All Data 7-20
<CR>
Next Data Entry Field, Select 7-25
<DEL>
Clear Data from Current Field 7-21
<ESC> C
Advanced Mode, Select 7-19
<ESC> c
86XX Emulation Mode, Select 7-19
<ESC> D
Field Decrement, Set 7-22
<ESC> E
Format, Select 7-24
<ESC> F
Field, Select 7-22
<ESC> G
Page, Select 7-26
<ESC> I
Field Increment, Set 7-23
<ESC> N
Increment and Decrement, Disable 7-25
<ESC> P
Program Mode, Enter 7-27
<ESC> <SP>
Start and Stop Codes (Code 39), Print 7-28
<ESC> <T>
Test and Service Mode, Enter 7-29
<ETB>
Print 7-27
<FF>
Form Feed 7-24
<FS>
Numeric Field Separator 7-26
<GS>
Alphanumeric Field Separator 7-19
<RS>
Quantity Count, Set 7-28
<SUB>
Batch Count, Set 7-20
Configuration Commands
<BS>
Warm Boot 7-30
<SI> C
86XX or Advanced Mode on Power Up 7-31
<SI> D
End-of-Print Skip Distance, Set 7-34
<SI> d
Dark Adjust, Set 7-34
<SI> F
Top of Form, Set 7-41
<SI> f
Label Rest Point, Adjust 7-36
<SI> g
Media Sensitivity, Select 7-37
<SI> I
Number of Image Bands, Set 7-38
<SI> i
IBM Language Translation, Enable or Disable 7-35
<SI> L
Maximum Label Length, Set 7-37
<SI> l
Printer Language, Select 7-40
<SI> N
Amount of Storage, Define 7-32
<SI> R
Label Retract, Enable or Disable 7-36
<SI> r
Label Retract Distance, Set 7-36