Intermec EasyCoder 4100, User Manual

Page: 178 / 282

7-8
FrGoth
4100 Bar Code Label Printer User's Manual
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Summary of the Printer Command Set (Continued)
Command Factory 8636/46 Page Command
Function Code Default Emulation No. Mode
Page, Transmit
<ESC>y
1 no 7-27 Print
Pitch Label, Print*
C
yes 7-66 Test/Serv.
Pitch Size, Set
g
12 no 7-63 Program
Point Size, Set
k
12 no 7-63 Program
Postamble, Set
<EOT>
NUL yes 7-39 Configuration
Preamble, Set
<SOH>
NUL yes 7-39 Configuration
Print
<ETB>
yes 7-27 Print
Print Line Dot Count Limit, Set
v
yes 7-64 Program
Print Quality Label, Print
Q
yes 7-66 Test/Serv.
Print Speed, Set
<SI>S
30 yes 7-39 Configuration
Printer Language, Select
<SI>l
0 yes 7-40 Configuration
Printhead Parameters, Transmit
<ESC>H
yes 7-27 Print
Printhead Pressure, Set*
<SI>H
0 N/A 7-40 Configuration
Printhead Resistance Test, Begin*
B
N/A 7-66 Test/Serv.
Printhead Resistance Values, Transmit*
S
N/A 7-67 Test/Serv.
Printhead Temperature Sensor Value, Transmit
P
yes 7-66 Test/Serv.
Printhead Test Parameters, Set*
<SI>U
N/A 7-40 Configuration
Printhead Volt Supply Value, Transmit
V
no 7-67 Test/Serv.
Program Mode, Enter
<ESC>P
yes 7-27 Print
Program Mode, Exit
R
yes 7-64 Program
Program Number, Transmit
<ESC>M
yes 7-28 Print
Quantity Count, Set
<RS>
1 yes 7-28 Print
Reflective Sensor Value, Transmit
M
no 7-66 Test/Serv.
Remaining Quantity and Batch Count, Transmit
<ESC>Q
yes 7-16 Immediate
Reset
<DLE>
yes 7-16 Immediate
* The 4100 printer ignores these commands.