Intermec EasyCoder 4100, User Manual

Page: 207 / 282

7
7-37
Printer Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Label Stock Type, Select
Purpose : Selects the type of label stock.
Default : n=1
Syntax
:
<SI>T{n}
n=0 Continuous label stock (no breaks between
labels).
n=1 Label stock with gaps between labels.
n=2 Label stock with marks between labels (on back
of label stock).
Notes : To make this command effective, reset the printer, cycle
the power, or press the [FEED] after issuing the
command.
Label Width, Set
Syntax :
<SI>W{n}
Notes
:
This command is ignored by the 4100 printer.
Maximum Label Length, Set
Purpose : Defines the maximum label length as n dot increments.
This number is used only for detecting media faults. It is
not used to limit the image size of a format on the label.
Default : n=1000
Syntax
:
<SI>L{n}
n must be a number from 100 to 4800 in dot increments.
Notes : To make this command effective, reset the printer or cycle
the power after issuing this command.
Media Sensitivity, Select
Purpose
:
Selects the media sensitivity of the printer.
Default : n=0
m=420 for direct thermal media
m=567 for thermal transfer media