Intermec EasyCoder 4100, User Manual

Page: 219 / 282

7
7-49
Printer Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Notes : Parameters for the default field are:
Field origin 0,0
Field direction 0 degrees
Bar code Code 39
Check digits Disabled
Prefix None
Ratio 3 to 1
Interpretive Disabled
Height magnification 50
Width magnification 1
Data origin Print mode
Data length 20
Bitmap Cell Height for Graphic or UDF, Define
Purpose : Defines the height of a graphic or user-defined font.
Default : n=1 Bitmap fonts and graphics
Syntax
:
y{n}
n values can range between 1 and 600 (1 and 800 with
expansion RAM).
n is the number of rows for a graphic or font (bitmap).
For outline fonts, n represents the height of the base
character in number of dots.
Notes
:
An error code (52) is generated for an invalid height.
Bitmap Cell Width for Graphic or UDF, Define
Purpose : Defines the maximum width for a graphic or any
character in a font. Each character has a width within this
amount, which should be at least as wide as the widest
character in the font. n is the number of columns for the
UDC, bit-mapped or user-defined font. For outline fonts,
n represents the width of the base character in number of
dots.
Default : n=1 Bitmap fonts and graphics