Intermec EasyCoder 4100, User Manual

Page: 194 / 282

7-24
FrGoth
4100 Bar Code Label Printer User's Manual
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Notes : The data is in the form of the current printer mode (that is
Advanced or 86XX Emulation ). Each data byte represents
6 bits of the font’s bitmap in Advanced mode or one bit in
86XX Emulation mode.
A target printer to which the commands and data are sent
remains in Advanced mode.
An error code (27) is generated if an invalid font number
is entered.
Form Feed
Purpose : Feeds a label out to the next print point.
Syntax
:
<FF>
Notes : If self-strip is used, the printer feeds out one blank label to
the strip pin, skipping an entire label.
If batch operation is used with die cut label stock, the label
moves to the tear bar.
If continuous label stock is used, the label stock moves to
the end-of-print skip distance.
Format, Select
Purpose : Selects a format for data entry or printing.
Default : n=0
Syntax
:
<ESC>E{n}{,m}
Format n is a numeric format ID ranging from 0 to 19.
If a page other than 0 is selected, n is an alphabetic format
position within the page with a range from a to z.
When the ,m parameter is enabled, only the fields that
change are reimaged for subsequent prints. Otherwise ,
the entire label is reimaged. If ,m is set to 0, it is disabled.
If ,m is set to non-zero, it is enabled.
Notes : After the format is selected, the field pointer points to the
lowest numbered data entry field.