Intermec EasyCoder 4100, User Manual

Page: 205 / 282

7
7-35
Printer Commands
Helvitica condensed 9 pt italic
Co d e 39 18 p t
If you enter a value for n, it applies to both continuous
mode and label stock mode, regardless of the mode in
which the value was entered.
Entering the <SI>D command without setting any
parameters returns the printer to the default.
This command is effective upon execution. This command
is ineffective in self-strip applications.
IBM Language Translation, Enable or Disable
Purpose : Turns the IBM language translation feature on or off.
Default
:
n=0
Syntax :
<SI>i{n}
n=0 Disable IBM translation.
n=1 Enable IBM translation.
Notes : This feature allows IBM compatible characters to replace
standard ASCII characters based on the current printer
language. This command overrides the language
translation that is based on the current printer emulation.
This command is effective upon execution.
Intercharacter Delay, Set
Purpose
:
Sets the intercharacter delay equal to n in milliseconds.
The intercharacter delay is the time delay between
characters in a message transmitted by the printer.
Default : n=0
Syntax :
<SYN>{n}
n must be a number from 0 to 9999 in milliseconds.
Notes : This command is effective upon execution.
Interlabel Ribbon Save, Enable or Disable
Syntax :
<SI>s{n}
Notes
:
This command is ignored by the 4100 printer.