Intermec EasyCoder 4100, User Manual

Page: 273 / 282

I-5
Index
I
Helvitica condensed 9 pt italic
Co d e 39 18 p t
Component descriptions
AC power cord receptacle 1-9
DIP switches 1-9
feed button 1-5
front panel cover 1-5
fuse holder 1-9
head lift lever 1-11
label adjust guide 1-11
label dispense opening 1-5
label gap sensor adjustment 1-11
paper/ribbon indicator 1-5
pause button 1-5
pause indicator 1-5
power on indicator 1-5
power switch 1-9
printhead 1-11
printhead support adjust screw 1-11
printhead support plate 1-11
rewind adapter 1-11
rewinder clasp 1-11
rewinder hub 1-11
ribbon clasp 1-11
ribbon rewind hub 1-11
ribbon supply back stop 1-11
ribbon supply hub 1-11
right side cover 1-5
serial communications port 1-9
stop/cancel button 1-5
supply roll back stop 1-11
supply roll hanger 1-11
supply roll retainer 1-11
tear-off plate 1-11
Computer. See Host computer
Configuration
serial port 2-8
transmit parameters command 7-5
Configuration commands 7-13, 7-31
86XX Emulation mode
using DIP switches to set 5-19
86XX or advanced mode on power up 7-4, 7-31
amount of storage, define 7-4, 7-32
audible alarm, enable or disable 7-4, 7-32
auto-transmit 1, 2, and 3, disable 7-4, 7-33
auto-transmit 1, enable 7-4, 7-32
auto-transmit 2, enable 7-4, 7-33
auto-transmit 3, enable 7-4, 7-33
changing in Test and Service mode 5-16
number of dot increments 5-17
control panel access permission, set 7-5, 7-34
cutter, enable or disable 7-5, 7-34
dark adjust, set 7-5, 7-34
description of 7-31
DIP switch settings 5-16
end-of-print skip distance, set 7-5, 7-34
IBM language translation, enable or
disable 7-6, 7-35
intercharacter delay, set 7-6, 7-35
interlabel ribbon save, enable or disable 7-7, 7-35
label rest point, adjust 7-7, 7-36
using DIP switches to set 5-18
label retract distance, set 7-7, 7-36
label retract, enable or disable 7-7, 7-36
label stock type, select 7-7, 7-37
label width, set 7-7, 7-37
maximum label length, set 7-7, 7-37
media sensitivity, select 7-7, 7-37
message delay, set 7-7, 7-38
number of image bands, set 7-7, 7-38
online or offline on power up 7-7, 7-38
postamble, set 7-8, 7-39
preamble, set 7-8, 7-39
print speed, set 7-8, 7-39
printer language, select 7-8, 7-40
printhead pressure, set 7-8, 7-40
printhead test parameters, set 7-8, 7-40
ribbon save zones, set 7-9, 7-40
self-strip, enable or disable 7-9, 7-41
top of form, set 7-9, 7-41
using 7-31
Configuration parameters
transmit command 7-5, 7-21
Configuration test labels
explanation 1-18
printing 1-18
Connectors
requirements 2-17
Control codes
description 6-3
Control panel. See Front control panel
access permission command 7-5
Control panel access permission
set command 7-5, 7-34