Chapter 11: Network settings
Figure 28: UPnP auto configuration screen
To enable UPnP:
1. Connect the recorder to the router.
Note
: The router must support UPnP and this option must be enabled.
2. From the menu toolbar, click
Network Settings
>
UPnP
.
3. Check the
Enable UPnP
box.
4. From
Mapped Type,
select Auto or Manual.
If
Manual
is selected, enter the external ports and IP addresses required. Click the
Edit
icon
to change the values.
5. Click
Apply
to save the settings and click
Exit
to return to live view.
Network status
You can easily check network traffic in order to obtain information about the recorder
such as its linking status, MAC address, MTU, sending/receiving rate, and NIC type.
The Network Detection window shows the network traffic between the recorder and
your local network. However, the traffic between the plug and play cameras and the
NVR 21S is not shown.
You can also check the network connection status by testing its delay and packet loss.
80
TruVision NVR 21 (SP) User Manual
