Interlogix TruVision NVR 21 User Manual Download Page 122

Page: 122 / 171

Chapter 16: User management

• Local Advanced Operation:

Access HDD management (including the initialization

and modification of disk properties). Update system firmware as well as stop the I/O
alarm output.

• Local Shutdown/Reboot:

Shutdown or reboot the recorder.

Remote configuration settings

By default, only remote log search and two-way audio are enabled for operators, and
only the remote log search is enabled for guests.

• Remote Log Search:

Remotely view logs that are saved on the recorder.

• Remote Parameter Settings:

Remotely configure parameters and import

configuration.

• Remote Camera Management:

Remotely enable and disable channels.

• Remote Video Output Control:

For future use.

• Two-Way Audio:

Use two-way audio between the remote client and the recorder.

• Remote Alarm Control:

Remotely alert or control the relay output of the recorder.

Alarm and notification settings must be configured properly to upload to host.

• Remote Advanced Operation:

Remotely manage HDDs (initializing and setting

properties for HDDs) as well as remotely update system firmware and clear the I/O
alarm output.

• Remote Shutdown/Reboot:

Remotely shutdown or reboot the recorder.

Camera configuration settings

By default, all IP cameras are enabled for operators for each of these settings. By
default, the IP cameras are only enabled for local playback and remote playback for
guests.

•

Local Live View

: Locally select and view live video.

• Local Playback:

Locally play recorded files that are on the recorder.

• Local Manual Operation:

Locally start/stop manual recording on any of the

channels, snapshots, and video clips.

• Local PTZ Control:

Locally control PTZ dome cameras.

• Local Video Export:

Locally back up recorded files from any of the channels.

• Remote Live View:

Remotely select and view live video over the network.

• Remote Playback:

Remotely play and download recorded files that are on the

recorder.

116

TruVision NVR 21 (SP) User Manual

Summary of Contents for TruVision NVR 21












































































































































































Search results

Summary of Contents for TruVision NVR 21

Reviews:

Brands by name

Popular brands

Interlogix TruVision NVR 21, User Manual

Search results

Summary of Contents for TruVision NVR 21

Reviews:

Brands by name

Popular brands