Interlogix TruVision NVR 21 User Manual Download Page 130

Page: 130 / 171

Chapter 17: System information

Information

All, Local HDD Information, HDD S.M.A.R.T., Start Recording, Stop Recording,
Delete Expired Record, System Running Status

5. Click the

Search

button. A list of results appears.

6. Select a file and click:

Details

: Displays information on the log or recording. For a recording, it lists such

information as start time, type of event, local user, host IP address, parameter type,
camera number, and gives a description on the types of events recorded and when
record time was stopped.

Play

: Click to start playback of the selected recording.

Export

: Click to archive the selected file to a USB device. The export window

appears.

7. Click

Exit

to return to live view.

124

TruVision NVR 21 (SP) User Manual

Summary of Contents for TruVision NVR 21












































































































































































Search results

Summary of Contents for TruVision NVR 21

Reviews:

Brands by name

Popular brands

Interlogix TruVision NVR 21, User Manual

Search results

Summary of Contents for TruVision NVR 21

Reviews:

Brands by name

Popular brands