Intel
®
Server System R1000WF Product Family System Integration and Service Guide
3
1.2
Prepare Chassis for Assembly
The accessory kit included with the chassis will include the following components:
Left and right black plastic air duct side walls
Chassis Support Bracket
Separate bags of screws for mounting the server board, air duct side walls, and chassis support
bracket
DIMM Blanks –
See Chapter 2 for usage
Black Mylar “No CPU” processor socket spacers
– See Chapter 2 for usage
The following components will be found inside the chassis. Each should be removed:
Clear plastic air duct
– See Chapter 2 for usage
A box with two processor heat sinks
– See Chapter 2 for usage
Two riser card brackets
– See Chapter 2 for usage
Two (3-fan) system fan assemblies
1.
Remove the System Cover
Note
:
A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on your work surface.
Figure 3. Chassis Cover Removal
a)
Loosen the two captive thumb screws located on the back edge of the system cover (See Letter “A”)
b)
Slide cover back and lift upward (see Letter "B").