Intel
®
Server System R1000WF Product Family System Integration and Service Guide
82
7.2
Replacing the System Battery
The battery on the server board powers the Real Time Clock for up to 10 years in the absence of power.
When the battery starts to weaken, it loses voltage, and stored server settings and system clock and date
settings maybe lost.
Battery Specification:
Lithium
3V
Coin CR-2032
Contact your customer service representative or dealer for a list of approved devices.
Warning
: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s
instructions.
Advarsel
: Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af
samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
Advarsel
: Lithiumbatteri - Eksplosjonsfare. Ved utskifting benyttes kun batteri som anbefalt av
apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
Varning
: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som
rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.
Varoitus
: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan
suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
Figure 99. Replacing the Backup Battery
1.
Locate the battery on the server board.
2.
Gently press the metal clip as shown to release the battery (see Letter “A”).
3.
Remove the battery from the plastic socket (see Letter “B”).
4.
Dispose of the battery according to local ordinance.
5.
Remove the new lithium battery from its package and being careful to observe the correct polarity, insert
it in to the battery socket.