Intel
®
Server System R1000WF Product Family System Integration and Service Guide
30
Figure 48. 2.5” Drive Carrier Assembly – Drive Carrier and Drive Blank Alignment Features
Note: The 2.5” drive blank and drive carrier each have an alignment feature (shown above) to ensure proper
assembly. When re-installing a drive blank in to the drive carrier, ensure the features are aligned prior to
installation. Failure to properly install a drive blank may result with the carrier assembly not fitting properly
in to the chassis drive bay.
2.6.4
3.5” HDD/SSD Drive Assembly (Intel® Server R1304WFxxx)
Figure 49. 3.5" Drive Carrier Assembly - Drive / Drive Blank Removal
1.
Remove the drive or drive blank from the carrier by holding the carrier assembly top side down in your
right hand. Using your left hand, gently rotate the bottom edge of the left rail upwards (see Letter “A”)
while at the same time pushing the drive or drive blank down away from the carrier (see Letter “B”).
