Intel
®
Server System R1000WF Product Family System Integration and Service Guide
1
1.
Server Building Block System Integration
Purpose
This chapter provides instructions for the integration of the following Intel server building blocks:
Intel® Server Chassis R1304WF
+ Any server board from the Intel® Server Board S2600WF product family
If your system came with the server board pre-installed in the chassis, you can skip this chapter and proceed
to
Chapter 2
–
Essential System Component Installation and Service
to continue the system integration.
In addition to the Intel server building blocks defined above, the following system components (Sold
Separately) will also be needed to complete the full system integration:
Appropriate SAS/SATA Data Cables
Appropriate PCIe OCuLink Data Cables for NVMe support
Appropriate Riser Card(s)
Appropriate Power Supply Module(s)
Processor(s) – Intel® Xeon® processor Scalable family
Memory - DDR4 DIMMs
Appropriate Power Cable(s)
Storage Devices – HDDs, SSDs, M.2
PCIe Add-in Cards
Optional Server System Accessories
Reference the
Intel® Server S2600WF Product Family Configuration Guide
for a complete list of available
accessories and spares
Before You Begin
Before working with your server product, observe the safety and ESD precautions found in the Warnings
section at the beginning of this manual.
Tools and Supplies Needed
Anti-static wrist strap and conductive foam pad (recommended)
Phillips* (cross head) screwdriver (#1 and #2 bits)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis.
Instruction Format
Each procedure described in this chapter will follow an illustration first format. This format will give the
reader the option to follow a quicker path to system integration by first seeing an illustration of the intended
procedure. If necessary, the reader can then follow the step-by-step instructions that will accompany each
procedure.
