Intel
®
Server System R1000WF Product Family System Integration and Service Guide
22
4.
Secure PHM to the processor socket assembly
Figure 34. Installing the PHM
Using a T30 Torx bit screwdriver, securely tighten (12 in-lb) each fastener in the sequence shown on
the label located on the top of the heat sink
CAUTION
: Failure to tighten the heat sink screws in the specified order may cause damage to the processor
socket assembly. Each heat sink screw should be fully tightened to 12 in-lb torque before securing the next
screw in the sequence.
5.
For a second procesor, repeat the processor installation instructions above, ensuring the proper
processor heatsink and processor carrier clip are used for the installation.
For single processor configurations where a 2
nd
processor is not configured, install the CPU#2 heat on to the
CPU #2 socket to ensure proper air flow when the system is operational.
See section 3.10 for installation instructions related to fabric processor accessory kits.
