Intel
®
Server System R1000WF Product Family System Integration and Service Guide
17
2.4.1
PHM Assembly
1.
Remove the heat sink from its packaging. To avoid damage to the heat sink, grasp it by its narrower, top
and bottom edges, as shown below.
Figure 24. Processor Heat Sink Handling
2.
Place the heat, sink bottom side up, on to a flat surface as shown.
Figure 25. PHM Assembly – Heat Sink Orientation
3.
If present, carefully remove the plastic protective cover from the bottom side of the processor to expose
the Thermal Interface Material (TIM)
4.
Locate the processor clip and place it on to a flat non-skid surface with corner latch pins facing down
5.
Carefully remove the processor from its packaging.
A processor should only be grasped by its edges.
Do not touch any part of the component side of the processor with your fingers
.
