Intel
®
Server System R1000WF Product Family System Integration and Service Guide
25
2.5
Memory Module (DIMM) Installation and Replacement
Components Required:
Up to 24 DDR4 DIMMs
General Memory Population Rules:
Memory channels for each processor are identified as A – F. Each memory channel includes two memory
module slots identified as 1 and 2. On the server board, each memory module slot is identified by Processor
#, Channel Identifier, and DIMM Slot #.
Examples)
CPU1_DIMM_A1
CPU1_DIMM_A2
CPU2_DIMM_A1
etc….
BLUE Memory Slots
identify
DIMM 1
for each memory channel.
To maintain required air flow within the system, certain memory slots
MUST
be populated with a DIMM or
supplied DIMM blank. DIMM blanks should only be removed when installing a DIMM in to the same memory
slot.
Figure 40. DIMM Blank
Figure 41. 1U System DIMM Slot Population Requirements for Thermal Compliance
