Intel
®
Server System R1000WF Product Family System Integration and Service Guide
4
2.
Remove the following from the chassis:
a)
Air Duct
b)
Box containing two (2) processor heat sinks
c)
Riser Card Brackets
d)
Power Supply Module (if present)
3.
Remove System Fan Modules
Figure 4. System Fan Assembly Removal
a)
Remove each fan assembly module from the chassis by grasping them on each side and pulling
straight up away from the chassis mounting pins (see Letter ‘A’).
1.3
System Assembly
Note on System Integration
It is highly recommended that the system integration process defined in the following sections within this
chapter be performed in the order specified. Following these instructions will result in the proper
installation of critical system components and provide recommended cable routing. Deviating from the
prescribed process may result in improper system assembly, a longer integration process, and a less than
desired system appearance.
