Intel Agilex F Series User Manual Download Page 2

Page: 2 / 75

Contents

1. Overview........................................................................................................................ 4

1.1. Block Diagram.......................................................................................................4
1.2. Feature Summary..................................................................................................5
1.3. Box Contents........................................................................................................ 6
1.4. Recommended Operating Conditions........................................................................ 6

2. Getting Started............................................................................................................... 7

2.1. Intel Quartus

Prime Software and Driver Installation................................................ 7

2.2. Design Examples................................................................................................... 7

3. Power Up the Development Kit....................................................................................... 9

3.1. Default Settings.................................................................................................... 9
3.2. Applying Power to the Development Board.............................................................. 10

4. Board Test System........................................................................................................ 12

4.1. Set Up BTS GUI Running Environment.................................................................... 12

4.2. Test the Functionality of the Development Kit.......................................................... 16

4.3. Control On-Board Clock through Clock Controller GUI............................................... 25
4.4. Monitor On-Board Power Regulator through Power Monitor GUI.................................. 26
4.5. BTS Test Areas.................................................................................................... 27
4.6. Identify Test Pass- or Fail-based on BTS GUI Test Status........................................... 27

5. Development Kits Hardware and Configuration.............................................................28

5.1. JTAG Configuration Mode...................................................................................... 28
5.2. Active Serial (AS) x4 Configuration Mode................................................................ 28
5.3. Avalon-ST x16 Configuration Mode......................................................................... 28

6. Custom Projects for the Development Kit..................................................................... 30

6.1. Add SmartVID Settings in the Intel Quartus Prime QSF File....................................... 30
6.2. Golden Top......................................................................................................... 30

7. Revision History............................................................................................................31

A. Development Kit Components....................................................................................... 32

A.1. Board Overview and Components...........................................................................32

A.1.1. Board Overview....................................................................................... 32
A.1.2. Board Components...................................................................................32
A.1.3. Intel MAX 10 CPLD System Controller......................................................... 36

Contents

Intel

Agilex

™

F-Series FPGA (Two F-Tiles) Development Kit User Guide

Send Feedback

Summary of Contents for Agilex F Series












































































Search results

Summary of Contents for Agilex F Series

Reviews:

Brands by name

Popular brands

Intel Agilex F Series, User Manual

Search results

Summary of Contents for Agilex F Series

Reviews:

Brands by name

Popular brands