Error Control
This control displays data errors detected during analysis and allows you to insert
errors:
•
Detected Errors: Displays the number of data errors detected in the received bit
stream.
•
Inserted Errors: Displays the number of errors inserted into the transmit data
stream.
•
Bit Error Rate: Calculates the bit error rate of the transmit data stream.
•
Insert: Insert a one-word error into the transmit data stream each time you click
the button. Insert Error is only enabled during transaction performance analysis.
•
Clear: Resets the Detected Errors counter and Inserted Errors counter to zeros.
Run Control
•
TX and RX performance bars: Show the percentage of maximum theoretical
data rate that the requested transactions can achieve.
•
Start: This control initiates the loopback tests.
•
Data Rate: Displays the XCVR type and data rate of each channel.
Figure 13.
QSFP NRZ - Data Rate
4.2.5.2. The QSFP PAM4 Tab
Similar control functions with the QSFP NRZ tab.
4. Board Test System
739942 | 2022.09.21
Intel
®
Agilex
™
F-Series FPGA (Two F-Tiles) Development Kit User Guide
21
