manualshive.com logo in svg

Intel Agilex F Series, User Manual

Share
Download
Intel Agilex F Series User Manual Download Page 13

4.1.1. Download OpenJDK

To download the Temurin OpenJDK, follow these steps:
1. Download the Temurin OpenJDK using this link: 

https://adoptium.net/

releases.html

.

2. Select Architecture x64, Package Type JRE, and Version 11.
3. On Windows system, choose the JRE zip format file.
4. On Linux system, choose the JRE tar.gz format file.

Figure 3.

OpenJDK Version

Note: The JDK version can be updated, download the latest version.

4.1.2. Download OpenJFX

To download the OpenJFX, follow these steps:
1. Download the OpenJFX using this link: 

https://gluonhq.com/products/javafx/

.

2. Select JavaFX version 17.0.2.
3. For the Windows system, download the JavaFX Windows x64 SDK.
4. For Linux system, download the JavaFX Linux x64 SDK.

Figure 4.

JavaFX Version

4.1.3. Install OpenJDK and OpenJFX

You have two downloaded zip files, follow these steps to install them.
1. On Windows system, Intel recommends you to unzip the files and put them in

the following directory:
— C:\Program Files\Java\jre

4. Board Test System

739942 | 2022.09.21

Send Feedback

Intel

®

 Agilex

™

 F-Series FPGA (Two F-Tiles) Development Kit User Guide

13

Summary of Contents for Agilex F Series












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands