manualshive.com logo in svg

Intel Agilex F Series, User Manual

Share
Download
Intel Agilex F Series User Manual Download Page 3

A.2. FPGA Configuration.............................................................................................. 36

A.2.1. Programming the FPGA over On-Board Intel FPGA Download Cable II............. 37
A.2.2. Programming the FPGA over an External Intel FPGA Download Cable II........... 37

A.3. Default Switch and Jumper Settings....................................................................... 37

A.3.1. Switch Description................................................................................... 38
A.3.2. Jumper Description.................................................................................. 39

A.4. Input and Output Components...............................................................................40

A.4.1. Push Buttons...........................................................................................40
A.4.2. Switches.................................................................................................40
A.4.3. LEDs...................................................................................................... 41

A.5. Components and Interfaces...................................................................................41

A.5.1. PCI Express (PCIe) Interface..................................................................... 41
A.5.2. QSFP-DD Interface...................................................................................44
A.5.3. QSFP Interface........................................................................................ 46
A.5.4. CXL Interface.......................................................................................... 47
A.5.5. DDR4 DIMM1 Interface.............................................................................48
A.5.6. DDR4 DIMM2 Interface.............................................................................52
A.5.7. DDR4 Component Interface.......................................................................57
A.5.8. HPS I/O48 Interface.................................................................................60

A.6. I

2

C.................................................................................................................... 61

A.7. Intel MAX 10 SPI Bus........................................................................................... 63
A.8. Clock Circuits...................................................................................................... 63
A.9. HPS Daughter Card.............................................................................................. 64
A.10. System Power................................................................................................... 66
A.11. Power Guidelines............................................................................................... 67

A.11.1. In a Standard PCIe-Compliant System...................................................... 67
A.11.2. As a Standalone Evaluation Board Powered by Included Power Supply...........67

A.12. Power Distribution System.................................................................................. 68
A.13. Power Measurement........................................................................................... 69
A.14. Thermal Limitations and Protection.......................................................................69

B. Additional Information................................................................................................. 70

B.1. Safety and Regulatory Information.........................................................................70

B.1.1. Safety Warnings...................................................................................... 71
B.1.2. Safety Cautions....................................................................................... 72

B.2. Compliance Information........................................................................................75

Contents

Send Feedback

Intel

®

 Agilex

™

 F-Series FPGA (Two F-Tiles) Development Kit User Guide

3

Summary of Contents for Agilex F Series












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands