Integra CUSA NXT, Operator'S Manual

Page: 64 / 113

Chapter 4 • Preparing the CUSA
®
NXT for Surgery •
57
4.
Reposition the handpiece into the holder, securing Flat 1 (
1
) of the angled
extension into the designated slot of the holder.
5.
Using your fingers, screw the tip into the angled extension.
6.
Using the wrench, tighten the tip by turning it clockwise.
7.
Remove the handpiece from the holder.
8.
Attach the black shroud onto the handpiece by centering and aligning the
shroud with the silver angled extension.
Warning
Failure to center the shroud may cause the handpiece to overheat.
1