Integra CUSA NXT, Operator'S Manual

Page: 30 / 113

Chapter 2 • CUSA
®
NXT System Setup and Components •
23
About the Handpieces and Wrench Sets
Handpieces
The CUSA NXT Console supports a range of handpieces:
For the list of CUSA
®
Selector
®
handpieces, see page 47. Note that a brush
for cleaning the aspiration channel of the handpiece is supplied with each
handpiece (part # 1523101).
Note that the handpiece and the initially pre-packaged non-sterile tips and
flue(s) are supplied non-sterile and must be disassembled and sterilized
before use according to the instructions in Chapter 6.
Wrench Sets
Use the CUSA Selector wrench set when assembling and disassembling the
handpiece for cleaning and sterilization. Each handpiece is supplied with an
appropriate wrench set.
Each wrench set consists of a stainless steel holder and wrench, connected
by a chain. The cut-outs in the holder are sized according to its use with
specific handpieces.
Warning
Only use Integra handpieces and accessories with the CUSA NXT System. The
use of non-Integra handpieces or accessories may result in patient injury.
Non-Integra handpieces or accessories are not supported and are not covered
by warranty.
35 kHz Neurosurgery Handpiece