83
7
2. Insert a test strip into the test strip port with the gold
side of the test strip and silver prongs facing you. (Figure
7-3) until it stops. This turns on the PDM on the screen. Refer
to page 57 to check Pod status and to
Confirm ID
.
Figure 7-2
Channel to apply sample
OneTouch® Verio™
test strip
Silver prongs, insert into test strip port
Always verify that you are using OneTouch®
Verio™ test strips with your PDM (Figure 7-4).
From some PDM screens, you cannot access the One-
Touch® Verio™ blood glucose meter. For example, you
cannot use the meter while you are activating a Pod
or when an alert, alarm or communication error
screen is displayed. In these cases, if you insert a test
strip, the PDM beeps to alert you.
Figure 7-3
Figure 7-4
Summary of Contents for mylife OmniPod
Page 147: ...Alerts and Alarms 135 10...
