45
5
4. If an extended bolus or temporary basal or both are actively
running, you will see a message similar to that shown in Fig-
ure 5-3. Press
Confirm
to accept the cancellation.
Or press
Back
to return to the
More actions
menu.
5. After you press
Confirm
, you will see the message in
To remove the old Pod:
a. Gently lift the edges of the adhesive tape from your skin
and remove the entire Pod (Figure 5-5).
b. Use soap and water to remove any adhesive that remains
on the skin or, if necessary, use an adhesive remover.
c. Discard the used Pod according to local waste disposal
regulations or contact Customer Care for more informa-
tion about how to dispose of your used Pod.
6. After removing the old Pod, press
Next
.
7. Press
Yes
to fill and activate a new Pod (Figure 5-6).
.
Removing the Pod slowly will help to avoid
possible skin irritation.
Figure 5-3
Figure 5-4
Check the infusion site for signs of infection.
See “Avoid Infusion Site Infections” later in this
chapter.
Figure 5-5
Figure 5-6
Summary of Contents for mylife OmniPod
Page 147: ...Alerts and Alarms 135 10...
