10
2
3. Replace the battery door.
4. Turn the PDM face up. The PDM has begun to power on auto-
matically.
n
The mylife OmniPod Setup Wizard
The first time you turn on the Personal Diabetes Manager, the
Setup Wizard comes on automatically. Although setup is easy
with the Wizard, if you are a first-time user, your healthcare pro-
vider must guide you through the process. Setup takes only a
few minutes and is easy to do:
•
Use the
Up/Down Controller
buttons to increase or
decrease a number, or to move up or down a list.
•
Press the
Soft Key
labeled
Next
,
Select
,
Done
, or
Save
to con-
tinue to the next screen.
•
Press
Back
to return to the previous screen.
To get started, press
Next
on the Wizard's Welcome Screen to
begin setting up your PDM.
Enter your PDM ID
1. Use the
Up/Down Controller
buttons to scroll through the
list of characters. An up-and-down-arrow symbol on the
screen indicates the character that can be changed.
2. Press the middle Soft Key (labeled with the right arrow) to
move the underscore to the next character.
3. Enter each character one at a time. For example, if you want
to enter your name, you might enter J, a, n, e, [space], S, m, i, t,
h. (A blank character or space is the first and last option in the
scrolling menu.)
4. Press
Next
.
Select the ID screen color
1. Use the
Up/Down Controller
buttons to choose a color, then
press
Next
.
The diagram inside the compartment shows you which
direction to insert the batteries (Figure 2-2 on the previous
page).
Do not use any other type of batteries than AAA
alkaline batteries to power the PDM. Never use old
or used batteries; the PDM may not work properly.
Initial settings are “---” [blank] for target blood glucose
value, insulin-to-carbohydrate ratio, correction factor,
and duration of insulin action.
Summary of Contents for mylife OmniPod
Page 147: ...Alerts and Alarms 135 10...
