Insulet mylife OmniPod, Manual

Page: 37 / 190

Understanding and Adjusting Basal Rates
25
3
d. Press Next .
6. Enter the new temporary basal rate (or percent change), then
press Next .
7. Enter the duration of the temporary basal rate, from 0.5 hours
to 12 hours, then press Next .
8. Review the temporary basal name, rate, and duration, then
press Save to accept it.
Enable an existing temporary basal preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Temp basal , then press Select .
2. Choose the temporary basal preset you want to use from the
list (Figure 3-15), then press Select .
3. If you want, change the duration for the temporary rate, in
half-hour increments, then press Enter (Figure 3-16).
4. Press Confirm to begin the temporary basal rate shown on
the screen. The Pod beeps to indicate that the chosen tempo-
rary basal preset is running.
Figure 3-14
Figure 3-15 Figure 3-16