Insulet mylife OmniPod, Manual

Page: 78 / 190

Using the Personal Diabetes Manager
66
6
5. Reverse correction —Choose On or Off , then press Next .
6. Insulin action (duration) —Use the Up/Down Controller
buttons to choose a duration of insulin action , then press
Done .
7. Press OK .
Ratios/factors/targets
When the suggested bolus calculator is turned On , you can view
and change all the settings using the Ratios/factors/targets
menu option. Choose Review all settings , then press Select
(Figure 6-8a) or choose one setting from the menu, then press
Select (Figure 6-8b). The steps are the same whether you choose
all settings or individual ones.
1. Target BG and correct-above value —You can edit existing
segments and add segments, up to a total of 8.
a. To edit an existing target BG time segment, choose the
segment, then press Edit . Use the Up/Down Controller
buttons to choose a new start time, end time, target BG
value, and correct-above value (correction threshold).
Press
Next after each entry.
b. To add a segment, choose [add new] , then press New .
Use the Up/Down Controller buttons to choose a start
time, end time, target BG value, and correct-above value
(correction threshold). Press
Next after each entry.
c. When you have completed all the time segments you
want, press Done , then Save .
2. Min BG for calcs (smallest blood glucose value allowed for
calculating boluses)—Use the Up/Down Controller buttons
to enter a new minimum BG, then press Enter .
3. Insulin-to-carb (IC) ratio —Number of grams of carbohy-
drate covered by one unit of insulin . You can edit existing
time segments and add segments, up to a total of 8.
a. To edit an existing IC ratio time segment, choose the
segment, then press Edit . Use the Up/Down Controller
Figure 6-8a Figure 6-8b
When the suggested bolus calculator is turned Off , the
Ratios/factors/targets option does not appear in the
Bolus/basal/calcs menu.