Insulet mylife OmniPod, Manual

Page: 50 / 190

Understanding and Delivering Bolus Doses
38
4
Create a bolus preset
1. On the Home screen use the Up/Down Controller buttons
to choose Settings ; then press Select .
2. Choose Presets , then press Select .
3. Choose Bolus presets , then press Select .
4. Choose [add new] , then press New .
5. To use the mylife OmniPod System’s default naming system,
simply press Next . The default naming system automatically
assigns program names in numerical order, such as bolus 1,
bolus 2, bolus 3.
Or, to give a different name to the program:
a. Press the
Up/Down Controller buttons to enter the char-
acters that spell the name you want. The up and down
arrow symbol on the screen indicates which character can
be changed.
b. Press the middle Soft Key (labeled with the right arrow) to
move the underscore to the next character.
c. Enter each character one at a time. For example, if you
frequently take the same bolus at lunchtime, you might
enter L, u, n, c, h (Figure 4-16).
d. Press Next .
6. Enter the new bolus preset amount, up to the maximum
bolus you entered during setup; then press Next .
7. Review the bolus preset name and amount, then press Save
to accept it.
Enable an existing bolus preset
1. On the Home screen, use the Up/Down Controller buttons
to choose Bolus ; then press Select .
2. Choose the bolus preset you want to use from the list (Figure
4-17), then press Select .
3. Press Enter to confirm the bolus preset amount, or, if neces-
sary, use the Up/Down Controller buttons to adjust the
bolus amount.
Figure 4-16
Figure 4-17