Chapter 5: Using the web interface
98-122988-E
Administration
150
Setting up user permissions
You can restrict access to parts of the web interface for non-administrator users.
To set up the user permissions, do as follows:
1.
From the left navigation pane, select
ADMINISTRATION > User permissions
.
2.
For each item under
ALLOW USERS TO:
, select
•
yes
to allow access or
•
no
to block access to the settings.
3.
For each of the listed interfaces under
ALLOW AT COMMANDS ON:
, select
•
yes
to allow the use of AT commands, or
•
no
to block the use of AT commands on that interface.
Note that this setting does not take effect until the EXPLORER 700 is restarted.
4.
Click
Apply
.
The settings to which access is denied are greyed out for the non-Administrator user.
