Chapter 5: Using the web interface
98-122988-E
Setting up the EXPLORER
®
700
105
Power up behavior
Pointing at power up
If the EXPLORER 700 is placed in a fixed position it may not be necessary to go through the
pointing process every time the EXPLORER 700 is powered. You can set up the EXPLORER 700 to
automatically establish a connection to the BGAN network, if you know that the signal strength is
sufficient.
1.
In the
Power up
section of the
SETTINGS
window, select whether or not pointing is required at
power up.
• To go through the pointing process every time the EXPLORER 700 is powered, select
Yes
.
• To have the EXPLORER 700 automatically register itself on the network every time the
EXPLORER 700 is powered, select
No
.
2.
Click
Apply
.
If you have selected that pointing is not required at power up, the start up procedure will be as
follows:
1.
Power up.
2.
Enter the PIN. After the PIN is entered, the EXPLORER 700 immediately tries to connect to and
register on the BGAN network.
Automatic power up
1.
In the
Power up
section of the
SETTINGS
window, select whether or not the EXPLORER 700
should switch on automatically when external power is applied.
• To have the EXPLORER 700 switch on automatically when external power is applied, select
Yes
.
• To have the EXPLORER 700 switch on only when the power button is pressed, click
No
.
2.
Click
Apply
.
