Chapter 6: Maintenance and troubleshooting
98-122988-E
171
02800 to
02809
Bluetooth
device
database full
The list of paired Bluetooth
devices is full. The
EXPLORER 700 does not
allow more than 7 paired
devices.
Unpair a paired device to
make room for a new one.
For information on how to
unpair devices, see
Unpairing devices on
page 124.
02810 to
02819
Bluetooth
overload
blocks power
save
Too many Bluetooth
devices are in sleep mode.
Power save is blocked.
Unpair a device. The alarm
may take a while to be
cleared. If the alarm is not
cleared, unpair one more
device.
02900 to
02909
Network failed
authentication
The EXPLORER 700 does
not accept the network as a
valid BGAN network.
Restart the EXPLORER 700.
If the problem persists,
contact your distributor.
03000 to
03009
Antenna burst
loss
The antenna failed to
transmit.
If the problem persists,
contact your distributor.
03100 to
03109
Antenna cable
loss
calibration
failed
The antenna cable loss
cannot be determined.
The cable may be broken or
too long.
See Antenna interface on
Transceiver on page 183 for
max. cable length.
Use another cable, or try
disconnecting and
reconnecting the cable.
03300 to
03309
Antenna link
down
There is no connection with
the antenna. The reason
may be one of the
following:
1.
The cable is not
connected properly or
the cable is defective.
2.
A processor in the
antenna is faulty
1.
Check the cable and
the connectors.
Replace the cable if
necessary.
2.
Contact your supplier
for repair of the
antenna
ID
Alarm Text
Explanation
Remedy
