Chapter 5: Using the web interface
98-122988-E
The Dashboard
93
Viewing information on calls and data sessions
The following sections in the
Dashboard
show information on calls and data sessions.
•
ONGOING CALLS
is a list of calls that are currently active. The list shows the call type and the
time connected for each call.
•
ONGOING DATA SESSIONS
is a list of data Profiles that are currently active, including the IP
address that is assigned to each PDP context.
•
SESSIONS TOTAL
lists the totals for each connection. The list shows the time connected for
voice and Streaming data, and MB transferred for Standard data.
Pointing using web interface
Instead of using the display for observing the signal strength you can view and accept the signal
strength in the web interface.
Do as follows:
1.
From the
TERMINAL
section of the
Dashboard
, click the link
Go to pointing mode
. The Pointing
window opens, and the EXPLORER 700 enters pointing mode.
2.
Point the antenna as described in Pointing the antenna on page 26, while observing the
signal strength in the web interface.
3.
When you have obtained the highest signal strength you can get, click
Accept
.
The web interface now returns to the Dashboard, and the EXPLORER 700 tries to establish a
connection and register on the BGAN network.
Note
At this point the EXPLORER 700 may make a sound. This sound is used for pointing
the antenna. The frequency of the sound increases with the signal strength.
To toggle the pointing sound on/off, press
S
or
T
on the keypad of the
EXPLORER 700.
