Chapter 5: Using the web interface
98-122988-E
Handling messages
100
The EXPLORER 700 now attempts to send the message to the new recipient. To make sure the
message has been sent, look in the Sent folder.
•
Click
Delete
next to a message to delete it.
•
Click
Delete all sent messages
to delete all the messages.
Sending an SMS message to the EXPLORER
®
700
You can send an SMS message to the EXPLORER 700 e.g. from a mobile phone, using one of the
mobile subscriber numbers for voice. Dial
+870 <Mobile subscriber number>
To see the voice numbers of your EXPLORER 700, select
PROPERTIES
from the web interface or
from the display menu system and view
Mobile subscriber numbers
. Note, however, that these
numbers are only listed if they are available on the SIM card. Otherwise, refer to the information
included with your airtime subscription.
Receiving a message
If a message has arrived, the icon bar at the top of the web interface shows an unopened
envelope. Click the envelope to see the new message(s).
Otherwise, to see new messages, click
MESSAGES
from the left navigation pane.
The window shows new incoming messages.
If the message is not an SMS message but information of voice mail, call your voice mail service
number to hear the voice mail.
To find your voice mail service number, select
MESSAGES
>
Message settings
from the left
navigation pane and locate the
Voice mail service number
.
Note that the voice mail number is only shown if it is available on the SIM card. Otherwise, refer to
the information included with your Airtime subscription.
Note
There are two Voice numbers, one for 3.1 kHz Audio and one for Standard Voice.
Note
The EXPLORER 700 does not accept more than 100 incoming messages (including read
and unread messages). If you have received 100 messages, you have to delete some of
them in order to free space for new messages. Otherwise, the new messages are
rejected.
