Chapter 5: Using the web interface
98-122988-E
Setting up the EXPLORER
®
700
106
Setting the display backlight and contrast
To set the display backlight and contrast, do as follows:
1.
In the
Backlight
section of the
SETTINGS
window, set the timing.
The
Timed
period is the period of time the light will stay on after the last key is pressed.
2.
Set the level of the backlight with the
Set level
scroll bar.
3.
In the
Contrast
section, click
Yes
next to
Automatic
if you want the contrast to be adjusted
automatically according to the temperature.
The contrast of the display changes with the temperature. The EXPLORER 700 can
automatically adjust the contrast to compensate for these variations.
4.
If you want to set the contrast manually, set the contrast level with the
Set level
scroll bar.
5.
Click
Apply
.
Turning audio indicators on or off
The EXPLORER 700 has audio indicators for different events or situations.
To enable or disable these audio indicators, do as follows:
1.
In the
Audio indicators
section of the
SETTINGS
window, turn the audio indicators on or off
using the radio buttons. Each audio indicator is explained below.
2.
Click
Apply
.
The EXPLORER 700 has audio indicators for the following events:
•
Pointing.
The Pointing sound is used during the pointing process. The frequency increases with the
signal strength, to help you find the maximum signal strength when pointing the antenna.
This setting is a default setting. When the EXPLORER 700 is in pointing mode, you can toggle
pointing sound on/off for the current pointing process using
S
or
T
on the keypad of the
EXPLORER 700. However, the default setting applies at the next pointing process.
•
Messages.
The Message indicator is a sound indicating that a message has arrived.
•
Alarm.
The Alarm indicator is a sound indicating that an alarm is issued.
An alarm is issued if the EXPLORER 700 detects an error that requires your action.
