98-122988-E
191
Appendix B
AT commands
B
In this appendix
This appendix contains a list of AT Commands for the EXPLORER 700.
Starting up an AT command session
Set up your computer to use either the USB or Bluetooth interface. For further information, see
Using the USB interface on page 74 or Using a computer with Bluetooth on page 78.
Connect your computer to the USB or Bluetooth interface of the EXPLORER 700 and launch your
terminal program.
The following section contains a list of commands that can be used with the EXPLORER 700. For
further information on the AT commands, refer to the following standards:
•
ITU V.250
Serial asynchronous automatic dialing and control
•
3GPP TS 27.005 ver. 4.2.0
, Use of Data Terminal Equipment - Data Circuit terminating
Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service
(CBS)
•
3GPP TS 27.007 ver. 4.6.0
, AT command set for User Equipment (UE)
3GGP standards are found on
www.3gpp.org
ITU standards are found on
www.itu.int
