Chapter 4: Using the interfaces
98-122988-E
Using a computer
80
10. When you are asked for a phone number, type:
*98#
if you want a Standard data connection to the Internet and/or the web interface, or
*99#
if you are going to connect
only
to the web interface in the EXPLORER 700.
To dial up using a specific Profile, type
*98*<CID>#
.
To find the <CID> number, access the web interface, select
SETTINGS > USB
(or Bluetooth) and
locate the Profile CIDs section at the bottom of the window.
For further information, see Configuring the USB interface on page 110 or
Configuring the Bluetooth interface on page 120.
11. Click
Next
.
12. If you are using UDI, enter the User name and Password and click
Next
.
If you are not using UDI, simply click
Next
without entering User name and Password.
See Using 64 kbps UDI (ISDN) through the USB interface on page 76.
13. Click
Finish
.
When you connect to the USB interface, or to the Bluetooth interface using dial-up, you must open
this dial-up connection to access the Internet or the web interface.
To open the dial-up connection (in Windows XP), select
Connect To
from the
Start
menu, select
your dial-up connection and click
Dial
. When the connection is established, you can access the
Internet as usual.
Note
You may need to enter User name and Password to access the Internet. If necessary,
enter the User name and Password supplied by your Internet Provider.
