Chapter 2: Getting started
98-122988-E
34
Connecting to the LAN interface
Do as follows:
1.
Connect the LAN cable to the network interface of your computer.
A suitable cable is provided with your EXPLORER 700.
2.
Connect the other end of the
cable to one of the LAN
connectors on the
EXPLORER 700.
3.
Start up and point the EXPLORER 700 as described earlier in this chapter.
4.
Power on the computer.
5.
When power up and pointing is completed, check the connection e.g. by starting your Internet
Browser.
You may have to disable the Proxy server settings in your browser. For further information,
see Browser settings on page 86.
What’s next?
After reading this chapter you should be able to start up the EXPLORER 700 and make a simple
data or voice connection.
The next chapters provide more information on the user interfaces and the setup of the
EXPLORER 700. The following chapter, Using the display and keypad, explains the display menu
system, which is the basic tool for setting up the EXPLORER 700.
