Chapter 5: Using the web interface
98-122988-E
Setting up the interfaces
125
Configuring the Phone/Fax settings
Do as follows:
1.
Select
SETTINGS
>
Phone/Fax
from the left navigation pane.
2.
Select
Enabled
or
Disabled
to enable/disable the Phone/Fax interface.
3.
Set the call type for incoming and outgoing calls.
Call types are described in more detail in Selecting the call type on page 56.
• For
Incoming calls
, you can check Standard or 3.1 kHz Audio or both.
If you check both, any device connected to the Phone/Fax interface will react (ring) on
incoming calls.
If you select e.g. Standard, the Phone/Fax interface will only react on calls made to the
Standard phone number.
