Ingeteam INGECON SUN 1000TL U B360, Installation And Operation Manual

Page: 40 / 180

ABK2027IQE01_A - Installation and Operation Manual
Test
Parameters
Acronym Description Units Defined value
VW
P
rated
Output Power Rating W
Rated power
depending on model
[V
min
, V
max
] AC voltage range with function enabled V
Voltage range
depending on model
V
nom
Nominal AC voltage V
Nominal AC voltage
depending on model
MSA
Vac
AC voltage accuracy %V 1%
MSA
watts
Output Power accuracy %W 2%
MSA
t
Accuracy of time s 0.0166
t
s
Settling time s 2
[V
start_min
,
V
start_max
]
Adjustment range of the start of active power reduction V
Voltage range
depending on model
VW
[V
stop_min
,
V
stop_max
]
Adjustment range of the stop of the curtailment
function
V No hysteresis
K
Power-Volt_Max
Maximum slope of active power reduction %
Prated
/V
Slope depending on
the rated voltage
K
Power-Volt_Min
Minimum slope of active power reduction %
Prated
/V
Slope depending on
the rated voltage
[t
return_min
,
t
return_max
]
Range of adjustment of a delay before return to normal
operation
s No hysteresis
[K
Power_Rate_Min
,
K
Power_Rate_Max
]
Adjustment range of the rate of return to normal
operation
%Prated/Sec No hysteresis
-- Use of hysteresis in the Volt-Watt function -- No
K
Power_Volt
Slope of the active power response to changes in
voltage
--
K
Power_Rate
Active power rate of return to normal operation --
(*) Under frequency FW behavior has not been evaluated, nevertheless this operation mode could be obtained by the commands
from the power plant controller.
2.20.5. Active and reactive power capacities
The following chart shows the reactive power capacity of these units.
20%
0 -50% -100% -150% 50% 100% 150%
40%
60%
80%
100%
100% Un
Active power (%)
Reactive power (%)
110% Un 90% Un
These units can support reactive power in the entire semicircle, depending on the output voltage.
40
Unit description Ingeteam