Ingenico iWL25 Series Operating Manual Download Page 68

Page: 68 / 132

SKYZER TECHNOLOGIES

PAGE 68 OF 132

INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE

Version 1.00

12 SURCHARGE

This functionality allows the merchant to apply a Credit card surcharge to the

cardholder for goods and services paid by credit card.

12.1 EFTPOS CONFIGURATION FOR CREDIT CARD SURCHARGING

This function allows the merchant to enable or disable the credit card

surcharge on the terminal.

12.1.1

Enable Credit Card Surcharging

Perform the steps below to enable credit card surcharge.

Step Terminal Display

Comment

1.0

Press FUNC

2.0

FUNCTION?

Enter 8 and press ENTER

3.0

ENABLE

SURCHARGING?

Press ENTER to enable Surcharging.

4.0

ENTER SURCHARGE
PERCENT (1-10)

0.00

This parameter specifies the credit card surcharge percent to apply for credit card

transaction. Please enter surcharge percent between 1 and 10 with 2 decimal

points.

Press ENTER

5.0

ENTER SURCHARGE

MINIMUM AMOUNT

1.00

This parameter specifies minimum amount to have to apply the credit card

surcharge.
Press ENTER.

Summary of Contents for iWL25 Series





































































































































Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands

Ingenico iWL25 Series, Operating Manual

Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands