Ingenico iWL25 Series Operating Manual Download Page 41

Page: 41 / 132

SKYZER TECHNOLOGIES

PAGE 41 OF 132

INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE

Version 1.00

5.6 SINGLE MERCHANT MEMORY RESET CONFIGURATION

This function allows the merchant configuration to be reset to factory default

values.

Step Terminal Display

Description

1.0

Press FUNC

2.0

FUNCTION?

Enter 9902 and press ENTER.

3.0

RESET

MERCHANT CONFIG

ENTER OR CLEAR

Press ENTER to reset the merchant configuration or CLEAR to cancel and return to

idle screen.

4.0

1 Merchant 1
2 Merchant 2
3 Merchant 3

Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by

ENTER.

5.0

PLEASE WAIT

Terminal displays PLEASE WAIT while retrieving the default merchant

configuration.

6.0

ETSL EFTPOS

MEMORY RESET

Terminal prompts ETSL EFTPOS MEMORY RESET while resetting the merchant

configuration and returns to idle.

NOTE: The above function is performed to delete the configuration for the

selected merchant only.

Summary of Contents for iWL25 Series





































































































































Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands

Ingenico iWL25 Series, Operating Manual

Search results

Summary of Contents for iWL25 Series

Reviews:

Related manuals for iWL25 Series

Brands by name

Popular brands