SKYZER TECHNOLOGIES
PAGE 127 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
Version 1.00
13.2 TRAINING MODE
The terminal has a training mode that can be toggled through the following
steps:
Step Terminal Display
Description
1.0
Press FUNC
2.0
FUNCTION?
Enter 9999, press ENTER
3.0
TRAINING MODE?
ENTER OR CLEAR
Press ENTER to enter Training Mode, or CLEAR to exit Training Mode
4.0
PLEASE WAIT
The terminal briefly displays “PLEASE WAIT” and then returns to the idle prompt
When the terminal is in training mode, a large indication will appear on the
display that the terminal is currently in training mode. To exit Training Mode,
repeat steps 2 and 3.
NOTE: Before the terminal can operate in training mode, the terminal,
merchant ID’s must be configured and the functions that you would like to
demonstrate on. Once the terminal is in the training mode, transactions can be
executed. When executing transaction in the training mode, the amount will
be the response code for the transaction, principally the “cent” area. For
example, if a transaction has been executed for an amount of $1.00 or $1.08,
the transaction will be accepted, where 00 is for ACCEPTED response code
and 08 is for SIGN ACCEPTED. Any other amount in the “cent” area will result
the transaction to decline.
Ensure that any pending transactions that are stored on the terminal have
been settled before exiting the training mode.
