SKYZER TECHNOLOGIES
PAGE 67 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
Version 1.00
3.0
1 Merchant 1
2 Merchant 2
3 Merchant 3
4 ALL MERCHANTS
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
Press CLEAR or CANCEL to select a different merchant.
4.0
PROCESSING NOW
PROCESSING NOW will be displayed.
5.0
ACCEPTED
ACCEPTED will be displayed when the terminal has made a successful connectivity
with Paymark and prints of the receipt.
6.0
EXPIRED PRE-AUTH
TRANS COUNT XXXX
VIEW TRANS Y/N
Press ENTER to view the expired pre-auth transactions that are stored on the
terminal and proceed with completing them or CLEAR to not view the transaction
and proceed with step 21.0.
EXPIRED STORED HOSPITALITY TRANSACTION
7.0
TRAN XXXXXX
AUTH XXXXXX
CARD XXXXX....XXXX
TOTAL AMT NZ$XX.XX
REQUIRED TRANS.Y/N
Transaction details are displayed.
Press ENTER to retrieve the current transaction to proceed with completion or
CLEAR to proceed with next transaction.
NOTE: The total amount displayed will include the previously authorised amount
plus any top-up amounts already processed for this transaction. This is to notify the
merchant that a top-up transaction was performed.
8.0
ORG AMT $XX.XX
FINAL AMOUNT?
$XX.XX
Key in the amount to be finalised then press ENTER. This can be greater or lesser
than the authorised amount.
NOTE: If ENTER is pressed without entering the final amount, the
transaction will be finalised for zero dollars.
9.0
PRINTING
Terminal beings to print of the receipts for the cardholder to sign to accept the final
amount entered.
10.0
PROCESSING NOW
PROCESSING NOW will be displayed on the terminal while processing the
transaction.
11.0
ACCEPTED
Once the transaction is successfully processed to Paymark network, terminal will
display ACCEPTED.
12.0
EXPIRED PRE-AUTH
OUTSTANDING
TRANS COUNT XXXX
Terminal advises merchant the total number of outstanding expired stored
transaction on terminal. Press ENTER to return to idle screen.
