SKYZER TECHNOLOGIES
PAGE 32 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
Version 1.00
5.2.3
TCP-IP Configuration
1.0
IP PRIMARY
HOST PORT
33876
This parameter specifies the Primary TCP/IP Port Number of Paymark network.
Press ENTER.
2.0
IP SECONDARY
HOST PORT
33876
This parameter specifies the Secondary TCP/IP Port Number of Paymark network.
Press ENTER.
3.0
ENABLE DHCP Y/N
1-YES 2-NO
Press the corresponding number key and press ENTER to set the IP address for the
terminal.
Option 1 – to allow the terminal to dynamically obtain its IP address and proceed
with step 7.0. Option 1 is selected by default.
Option 2 – to enter in static IP address for the terminal and proceed with step 4.0
4.0
USE DNS Y/N
1-YES 2-NO
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
5.0
IP Primary
HOST DNS
direct.paymark.co.nz
This parameter specifies the Paymark Primary DNS address. By default, it is set to
direct.paymark.co.nz. Press ENTER
6.0
IP Secondary
Host DNS
direct2.paymark.co.n
This parameter specifies the Paymark Secondary DNS address. By default, it is set
to direct2.paymark.co.nz. Press ENTER
7.0
USE DNS Y/N
2-NO
Option 2 – to allow the terminal to use Paymark IP address.
8.0
IP Primary
HOST IP ADDRESS
117.120.34.110
This parameter specifies the Primary Host IP Address. By default, it is set to
117.120.34.110. Press ENTER.
9.0
IP Secondary
HOST IP ADDRESS
117.120.32.110
This parameter specifies the Secondary Host IP Address. By default, it is set to
117.120.32.110. Press ENTER.
10.0
SAVE CONFIG Y/N
Terminal prompts to save configuration. Press ENTER to save configuration on the
terminal or CLEAR to exit and return to idle screen.
11.0
START TCP-IP Y/N
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.
